NEW DV-3 INTRAORAL CAMERA with cold white light system and new ergonomic design

You will be able to save in a video cassette the information of each patient. This way you will offer personalized attention for each patient, obtaining registers of them in real time.

Using the TV with the VCR you will be able to register and save the PRE and post treatment of each one of them in a personal cassette.

The connections you will have to make are the following:

• 1- The gray cable has two terminals, one RJ-11 and the other one DIN, connect the DIN terminal to the DIN input, which is on the end of the handle of the camera.

  IMPORTANT: in this connection the inscription of the gray cable ( TOP arrow) should match the light blue line in the handle of the camera, since to make contact this connection has one only position.

• 2- Connect the other end of the gray cable with RJ-11 terminal to the RJ-11 input which is in the black cable
• 3- Connect the black cable with RCA terminal ( video cable) to the IN input (video input) of your VCR ( VCR)
• 4- Connect a simple RCA cable to the OUT output ( video output) of your VCR and the other end to the video IN input (video input) of the TV
• 5- Finally connect the electric power source.

  IMPORTANT: the electric source of the DV-3 camera kit is an intelligent source which can be connected both to 110 and 220 volts without having any alteration in the image
  NOTE: When the camera is on, a green light will appear in the source and once the camera is connected this light will change to red, so with this system you will always know if your camera is functioning correctly, without the need to use any tester